Recent Water Damage Posts
Addressing Toilet Leaks
A leaking toilet does not have to ruin your day or consume your weekend.
Taking Care of Toilet Leaks
Home maintenance in Carriage Club, CO, is like home maintenance anywhere: a fact of life. A bathroom leak is not an unusual occurrence for homeowners, but addressing it quickly is important to prevent inconvenient and expensive water damage. Whether you are a DIY warrior or a person who prefers to call in the pros, knowing the cause of a leaking toilet can lead to a swift resolution.
The Usual Suspects
Toilets in the average home are not mechanically complex, and this is good news because it makes their repairs fairly predictable. Leaks are often noticed after a flush; if a puddle collects at the base, it could mean that:
- the wax seal has failed or the closet bolts need tightening.
- faulty supply tubes or shut off valves need replacing.
- the bowl could be cracked or prone to sweating.
The Appropriate Responses
Resolving a leaking toilet can range from a simple adjustment to a complete replacement or anything in between. Once you have identified the problem, the solution is likely to be one of the following:
• If tightening the closet bolts doesn’t resolve the problem, removing the toilet and replacing the wax ring could be necessary. The problem could also be a broken flange, which will become apparent when the old wax ring is removed. A broken flange will require replacement.
• If the supply tube has failed, it is wise to replace it with a flexible, stainless and mesh model. If the shut-off valve has failed, consider replacing it with a new quarter-turn ball valve.
• If the bowl is cracked, replacement will be necessary. If the tank or bowl sweats, installing a mixing valve is a solution many plumbers recommend.
A leaking toilet does not have to ruin your day or consume your weekend. Tackling it yourself or making an informed call to a professional can make fast work of the needed repair.
When Flushing Your Toilet Leaves Water on the Floor
No one wants to flush the toilet, only to find water leaking out onto the floor around it.
Here's What To Look For
No one wants to flush the toilet, only to find water leaking out onto the floor around it. In most cases, however, a leaking toilet isn't caused for alarm and is usually an easy fix. All you need to do is figure out what's causing it and take steps to remedy the problem.
Take a Look at the Wax Seal
At the base of the toilet is a wax gasket that creates a seal between the toilet and the floor. Normally, when the seal is tight, the water flows straight down into the pipe when you flush. However, if the wax dries out and becomes brittle, it can develop cracks or pull away from one or both surfaces, allowing water to escape out from under the toilet base. If that's the case, it's as simple as replacing the old gasket with a new one.
Make Sure the Tank is Tight
If the toilet tank isn't on there tight, water can escape from the juncture where the tank meets the bowl of the leaking toilet. Try wiggling it — the tank shouldn't move. If it does, it needs to be tightened. Turn off the water supply and empty the tank as much as possible. Then, tighten the bolts inside to secure the tank firmly to the bowl.
Check the Tank Flange
The flange is the mechanism inside the tank that allows the water to fill and empty into the toilet. If the arm piece is broken, you can use a repair strap to fix it, or, in the worst-case scenario, replace the mechanism altogether.
It should go without saying, but don't do anything to address your bathroom leak without shutting off the water supply first. If the steps outlined above aren't causing your leaking toilet, it's a good idea to call in professionals to fix the problem. Contact a plumber or a water damage specialist in Englewood, CO, to determine the cause, make the repairs necessary and help you prevent any further issues.
3 Ways To Fix a Toilet That Keeps Flushing
Commercial toilets run the risk of problems that may cause continued flushing.
Three Ways On Fixing Toilet Overflow Problems
Commercial toilets run the risk of problems that may cause continued flushing. The underlying cause of this problem may be determined by the setup of the bathroom facilities at a building in Englewood, CO. Here are three ways to fix toilet overflow problems and reduce the added cost and risk of a toilet flood associated with this plumbing issue.
1. Fix the Flushometer
A commercial structure may rely on a flushometer to eliminate waste from toilets or urinals. These systems are either manual or automatic. If facilities equipped with this technology start running continuously, it may be necessary to clean or replace the gasket of a manual flushometer or the diaphragm kit of an automatic model.
2. Check the Internal Components
Toilets that are not connected to flushometers may keep running for different reasons. A flapper may not seal properly and could require replacement or fill tube adjustments. A fill valve leak might also be the cause of the problem. These repairs are relatively easy for amateurs to complete, but a building owner or manager can also schedule expert repair and water damage restoration.
3. Call a Plumber
If the owner or manager of a commercial building cannot stop a toilet, it is time to contact a plumber. Repairs should ideally take place prior to a toilet overflow. If a facility has already become flooded, shut off the water supply and try to extract as much standing water as possible with a mop or wet-dry vacuum.
Whether the bathrooms in a commercial building are equipped with flushometers or have standard designs, these measures can stop water from continuously running through a toilet and reduce the risk of a toilet overflow. These fixes may be done by the owner or manager of a building in Englewood, CO, or it may be worthwhile to rely on a plumber to prevent water damage.
4 Steps To Take After Water Damage
Water damage in Denver, CO
4 Steps To Take After Water Damage
If your Denver, CO, home suffers water damage, you will likely need to file an insurance claim. This may seem complicated, but the following four simple steps can make the process go much more smoothly.
1. Keep a Home Inventory
Before your home suffers any damage, make a list of everything you would want to replace if it were damaged. Be as thorough as possible. Include purchase dates and prices as well as photos or videos of the items in their normal condition.
2. Stop the Water
When dealing with a leak, pipe burst, or other source of water damage, the first thing you should do is stop the flow of water. Depending on your skill level, you may have to do a temporary repair and then hire a professional for a more permanent solution.
3. Call Insurance Agent and Document Damage
After you have addressed the source of the water, call your agent to file an insurance claim. He or she can give you specific directions for what to do next and provide you with paperwork to fill out. Completing the paperwork promptly will help the claims process go more quickly.
Take a photo or video evidence of the damage. Make sure to get as much detail as possible. Follow any directions given to you by the insurance company.
4. Begin Cleanup
If a flood-affected many homes, the insurance company may not be able to send an adjuster immediately. However, it is important not to wait to get started drying out your home. Mold growth can develop within 24 hours, so get started as soon as possible. A professional restoration service is often helpful, but you can use pumps or wet/dry vacuums to extract standing water yourself and fans or dehumidifiers to dry out remaining moisture.
Filing an insurance claim after a water damage event does not have to be overwhelming, especially if you keep a home inventory on hand and call your agent promptly. Ask him or her any questions you have so that you fully understand the process.
6 Steps To Get the Most Money From Your Water Damage Claim
Inspection in a Denver, CO home
Here Is What You Should Do
When gushing water from bursting pipes damages your home, funds are required for repairs. That’s where insurance comes in. Full compensation, however, is only provided if you follow certain procedures. Here is what you should do.
1. Stop the Destruction
Turn off your main water valve and then mop up. Remove anything that has become soaked. Strategically place fans and open windows to dry everything as quickly as possible and prevent mold.
2. Contact Your Insurance
Time is of the essence so act quickly. Your insurance company can provide assistance by recommending a water restoration specialist known for servicing residences in Denver, CO.
3. Get a Second Opinion
Have a public insurance adjuster or independent contractor assess the situation triggered by your bursting pipes. This appraisal will arm you with knowledge if you later need to challenge your insurance company.
4. Begin the Restoration
Use a licensed plumber to fix broken pipe issues. Tear out damaged walls, remove soaked carpeting and do everything else necessary to get your home looking “Like it never even happened.”
5. Allow the Inspection
A claims adjuster will arrive at your address to catalog the requisite repairs. Because pre-existing problems are not covered, the representative will attempt to confirm the reasons for every piece of water damage.
6. Negotiate the Amount
However much your insurance company believes you are owed, the initial offer is likely to run low. Insurance representatives count on customers simply accepting whatever assessment they are handed without question. Scrutinize their report and match every item against your independently commissioned estimate. Politely but firmly inform them where they may be mistaken. Provide photos and documentation to back up your claims. If your corrections are unable to be disputed, an updated proposal may incorporate your demands.
Bursting pipes often cause structural damage that requires hefty sums to fix. If a disaster like this one affects you, follow these steps to be certain you receive every penny you deserve.
Safety First If Water Leaks from Light Fixtures
If you find water in light fixtures, safely handling the situation is a must
While some water issues in your Englewood, CO, may be immediately noticeable, some problems take time to make and appearance. If you find water in light fixtures, safely handling the situation is a must. Water and electricity don’t mix, so take precautions to avoid a fire before calling a water damage and restoration specialist to repair the damage.
Steps to Take
The moment water in light fixtures is found, the following steps should be taken:
- Locate the circuit breaker for the light fixtures and wall receptacles in the room and shut it off.
- Ensure light switches are off.
- Turn off the water main to the home to prevent additional water leaking in.
Address the Problem
Once the room is secured, the source of the problem can be addressed. Ceiling damage in a home can happen for an array of reasons. They include:
- Pipe leaks or bursts
- Faulty connectors on piping
- Improperly installed tubs or shower drains
- Roof damage, such as missing shingles and degraded exterior flashing
- Clogged gutters forcing water under shingles
Although a roof is designed to manage water flow if properly maintained, interior ceilings aren’t able to do so. If unexpected water happens, it will make it way along the easiest path down. Wherever there are holes in the drywall, such as where a fixture is attached, it becomes a prime trail to follow. Depending on the material of the ceiling, the excess moisture is absorbed until it eventually starts leaking out. Once the source of the problem is found, fixing it needs to be a priority. If it is not handled right away, it may mean more water in light or a potential mold growth problem or other secondary damage.
Anytime water makes an appearance around an electrical component, power down to ensure your home is safe. After taking safety precautions, you can count on the experts to make it “Like it never even happened.”
How to Avoid Costly Repairs Caused by Water Leaks
A water leak doesn't have to break the bank when you act fast
Hidden water leaks, such as those that might occur in underground pipes, are the ire of any business owner in Denver, CO. Not only can a leak cause you to lose water that costs you money, but even a small water leak can lead to big and costly damages in a short amount of time. Fortunately, most insurance policies cover damages caused by broken pipes.
Telltale Signs of a Water Leak
A water leak has several ways of revealing itself, sooner or later. The most obvious sign would be a higher than usual monthly water bill. Other physical signs that water damage is present would include the following:
- a patch of grass that grows faster than the rest
- cracks in your building's foundation or walls
- moisture building up in your floors
If you think you might have a leak, call a plumber right away. The longer you put off identifying and repairing it, the more damage it will cause to your building's structure, and the more costly the repairs will be.
Once a Leak is Confirmed
If it turns out you have a leak, contact your insurance agent immediately to see which expenses can be recouped. Because you don't know how long the pipe break has been present, or what damages it has caused that aren't visible to the eye, and those that are, also contact a disaster restoration specialist. You should never attempt a water damage restoration yourself, as there could be other dangers lurking, including bacteria and mold. A specialist has the right equipment and expertise to handle this type of job safely.
In older structures, aging pipes will eventually require replacement. Even newer pipes are prone to breakage when the earth shifts or the weather becomes extreme. A water leak doesn't have to break the bank when you act fast. Talk to your insurance agent so you know beforehand what type of coverage you have against pipe breaks.